1.Microcomputer chip ensuresaccurate control

微電腦芯片保證精確控制

2.Perfect protections:over charge,over-discharge,reverseconnection,PV cell panel reverse connection protection

完善的保護：過充保護，過放保護，反接保護，太陽能板反接保護。

3.Automatic brake and manual brakeensures that the wind turbine and the PV & wind hybrid charging controller operate safely and reliably

自動剎車及手動剎車保證風力發電機或者太陽能板配套控制器安全可靠運行。
4.Voltage for automatic brake(rectified voltage ofsolar panel) and the recovery time after automatic brake can be adjusted in accordance with customers demands

自動剎車電壓(可糾正太陽能板電壓)和剎車后的恢復時間可根據客戶要求進行調整。

5.High efficiency,soft braking, independent input circuits for wind turbine and the PV. As a result, if there is something wrong with one circuit, the other circuit can operate smoothly to provide stable power supply for load.

高效，軟件剎車獨立的風力發電機及太陽能板輸入回路。假如，某一回路出現故障，其他回路不受影響得為負載提供穩定的能量供給。

6.Controller for solar and wind turbine

本控制器使用于風力發電機和太陽能板。